Cracked Walnuts Vest |
||||||||||||||||||||||
|
|
|||||||||||||||||||||
Knitted vest in DROPS Kid-Silk and DROPS Puna / DROPS Merino Extra Fine. Piece is knitted bottom up with textured pattern, ridges, cables and rib. Size XS – XXL.
DROPS 237-10 |
||||||||||||||||||||||
---------------------------------------------------------- EXPLANATION FOR THE PATTERN: ---------------------------------------------------------- GARTER STITCH (back and forth): Knit all rows. 1 ridge vertically = knit 2 rows. PATTERN: See diagrams A.1 to A.10. Diagrams show all rows in pattern seen from the right side. KNIT TOGETHER: FROM RIGHT SIDE: Slip 1 stitch knitwise, knit 1, pass slipped stitch over stitch worked. FROM WRONG SIDE: Purl 2 together. STOCKINETTE STITCH: When working from wrong side, purl and when working from right side, knit. BUTTONHOLES (bottom up): Decrease for buttonholes on right band. 1 BUTTONHOLE = knit third and fourth stitch from edge together and make 1 yarn over. On next row knit yarn over to make hole. Decrease for buttonholes when piece measures: XS: 6, 14, 22 and 30 cm = 2⅜", 5½", 8¾" and 11¾" S: 6, 14, 22 and 30 cm = 2⅜", 5½", 8¾" and 11¾" M: 6, 14, 23 and 32 cm = 2⅜", 5½", 9" and 12½" L: 7, 16, 25 and 34 cm = 2¾", 6¼", 9¾" and 13⅜" XL: 6, 14, 22, 29 and 36 cm = 2⅜", 5½", 8¾", 11⅜" and 14¼" XXL: 6, 14, 22, 29 and 36 cm = 2⅜", 5½", 8¾", 11⅜" and 14¼" ---------------------------------------------------------- START THE PIECE HERE: ---------------------------------------------------------- VEST – SHORT OVERVIEW OF PIECE: Work front and back piece bottom up, back and forth in parts. BACK PIECE: Cast on 98-110-110-122-134-146 stitches on circular needle size 4 MM = US 6 with 1 strand of each quality (2 strands). Purl 1 row from wrong side. Work next row as follows from right side: 1 edge stitch in GARTER STITCH – read explanation above, work A.1 until 1 stitch remain, 1 stitch in garter stitch. When A.1 has been worked 1 time vertically, work pattern as follows: 1 edge stitch in garter stitch, work A.2 until 1 stitch remains, 1 edge stitch in garter stitch. When A.2 has been worked 1 time vertically, there are 114-128-128-142-156-170 stitches on needle. Switch to circular needle size 5.5 MM = US 9. Work pattern as follows: 1 edge stitch in garter stitch, work A.3 until 1 stitch remains, 1 edge stitch in garter stitch. REMEMBER THE KNITTING GAUGE! Repeat A.3 vertically until piece measures 16-17-19-19-21-22 cm = 6¼"-6¾"-7½"-7½"-8¼"-8¾". Work pattern, begin from right side as follows: 1 edge stitch in garter stitch, work A.4 until 1 stitch remains and decrease at the same time 27-36-36-40-44-48 stitches evenly, 1 edge stitch in garter stitch = 87-92-92-102-112-122 stitches. When A.4 has been worked 1 time vertically, work pattern as follows: 1 edge stitch in garter stitch, work A.5 until 1 stitch remains, 1 edge stitch in garter stitch. Repeat A.5 vertically. When piece measures 30-31-32-33-34-35 cm = 11¾"-12¼"-12½"-13"-13⅜"-13¾", cast on 6 new stitches at the end of the next 2 rows = 99-104-104-114-124-134 stitches. Work the new stitches in garter stitch until finished measurements. Continue pattern like this until piece measures 33-35-36-38-39-41 cm = 13"-13¾"-14¼"-15"-15¼"-16⅛". Work pattern, begin from right side as follows: 7 stitches in garter stitch, work A.6 until 7 stitches remain, 7 stitches in garter stitch. When A.6 has been worked 1 time vertically, there are 150-158-158-174-190-206 stitches on needle. Work pattern as follows: 7 stitches in garter stitch, work A.7 until 7 stitches remain, 7 stitches in garter stitch. Work A.7 3 times in total vertically. Piece measures approx. 45-47-48-50-51-53 cm = 17¾"-18½"-19"-19¾"-20"-21". Work pattern as follows: 7 stitches in garter stitch, work A.8 until 7 stitches remain and decrease at the same time 51-54-54-60-66-72 stitches evenly, 7 stitches in garter stitch = 99-104-104-114-124-134 stitches. When A.8 has been worked 1 time vertically, work A.8a vertically until finished measurements. When piece measures 49-51-53-55-57-59 cm = 19¼"-20"-21"-21⅝"-22½"-23¼", bind off the middle 13-14-16-18-20-20 stitches and finish each shoulder (43-45-44-48-52-57 stitches) separately. On next row from neck bind off 1 stitch at the beginning of row = 42-44-43-47-51-56 stitches. On next row from the neck bind off the first 7 stitches = 35-37-36-40-44-49 stitches. Then work diagonal shoulder, begin on next row from the neck as follows: * Work pattern as before until 8-9-9-10-11-12 stitches remain, turn and work back *, work from *-* 3 times in total. I.e. work 8-9-9-10-11-12 stitches less on every row from the neck. On last row towards neck, cast on 2 new stitches at the end of row = 37-39-38-42-46-51 stitches. Now work and bind off with an edge over shoulder stitches. Work stitches cast on with shoulder stitches as follows: Work * 1 stitch in STOCKINETTE STITCH – read explanation above, work next stitch together with first/next stitch from shoulder – read KNIT TOGETHER, pass the 2 stitches back on the needle they came from with strand on wrong side of piece, make sure not to tighten yarn too much *, work from *-* until all stitches from shoulder have been worked together with the 2 new stitches that were cast on. Bind off the 2 stitches. Work the other shoulder the same way. RIGHT FRONT PIECE: Cast on 61-67-67-73-79-85 stitches on circular needle size 4 MM = US 6 with 1 strand of each quality. Purl until 7 stitches remain, 7 band stitches in garter stitch. On next row from right side work pattern as follows: 7 band stitches in garter stitch, work A.9, purl 1-0-0-1-0-1, knit 1-0-0-1-0-1, work A.1 until 1 stitch remains, 1 edge stitch in garter stitch. When A.1 has been worked 1 time vertically, work pattern from right side as follows: 7 band stitches in garter stitch, A.9 as before, work A.2 until 1 stitch remains, 1 edge stitch in garter stitch. Decrease for BUTTONHOLES - read explanation above. When A.2 has been worked 1 time vertically, there are 70-77-77-84-91-98 stitches on needle. Switch to circular needle size 5.5 MM = US 9. Work pattern as follows: 7 band stitches in garter stitch, A.9a, make 1 yarn over (this is done so that the pattern is the same mid front on both front pieces), work A.3 until 1 stitch remains, 1 edge stitch in garter stitch = 71-78-78-85-92-99 stitches. Knit yarn over twisted on next row, then purl from right side and knit from wrong side. Repeat A.3 vertically until piece measures 16-17-19-19-21-22 cm = 6¼"-6¾"-7½"-7½"-8¼"-8¾". Work pattern, begin from right side as follows: 7 band stitches in garter stitch, A.9a as before, work A.4 until 1 stitch remains and decrease at the same time 15-17-17-19-21-23 stitches evenly, 1 edge stitch in garter stitch = 56-61-61-66-71-76 stitches. When A.4 has been worked 1 time vertically, work pattern as follows: 7 band stitches in garter stitch, A.9a as before, work A.5 until 1 stitch remains, 1 edge stitch in garter stitch. Repeat A.5 vertically. When piece measures 30-31-32-33-34-35 cm = 11¾"-12¼"-12½"-13"-13⅜"-13¾", cast on 6 new stitches at the end of next row from right side = 62-67-67-72-77-82 stitches. Work the new stitches in garter stitch until finished measurements. Continue pattern like this until piece measures 33-35-36-38-39-41 cm = 13"-13¾"-14¼"-15"-15¼"-16⅛". Work pattern, begin from right side as follows: 7 band stitches in garter stitch, A.9a as before, work A.6 until 7 stitches remain, 7 stitches in garter stitch. When A.6 has been worked 1 time vertically, there are 83-91-91-99-107-115 stitches on needle. Work pattern as follows: 7 band stitches in garter stitch, A.9a as before, work A.7 until 7 stitches remain, 7 stitches in garter stitch. Work A.7 3 times in total vertically. Piece measures approx. 45-47-48-50-51-53 cm = 17¾"-18½"-19"-19¾"-20"-21". Work pattern as follows: 7 band stitches in garter stitch, A.9a as before, work A.8 until 7 stitches remain and decrease at the same time 21-24-24-27-30-33 stitches evenly, 7 stitches in garter stitch = 62-67-67-72-77-82 stitches. When A.8 has been worked 1 time vertically, work A.8a vertically until finished measurements. When piece measures 50-52-54-56-58-60 cm = 19¾"-20½"-21¼"-22"-22¾"-23⅝", bind off the first 7 stitches on next row from wrong side = 55-60-60-65-70-75 stitches. Then work diagonal shoulder, begin on next row from the neck as follows: * Work pattern as before until 8-9-9-10-11-12 stitches remain, turn and work back *, work from *-* 3 times in total. I.e. work 8-9-9-10-11-12 stitches less on every row from the neck. On last row towards the neck work until 20-23-24-25-26-26 stitches remain, slip the last 20-23-24-25-26-26 stitches on a thread for shawl collar and cast on 2 new stitches on needle = 37-39-38-42-46-51 stitches. Now work and bind off with an edge over shoulder stitches. Work stitches cast on with shoulder stitches as follows: Work * 1 stitch in stockinette stitch, work next stitch together with first/next stitch from shoulder – remember KNIT TOGETHER, pass the 2 stitches back on the needle they came from with strand on wrong side of piece, make sure not to tighten yarn too much *, work from *-* until all stitches from shoulder have been worked together with the 2 new stitches that were cast on. Bind off the 2 stitches. SHAWL COLLAR: Slip the 20-23-24-25-26-26 stitches from stitch holder on circular needle size 5.5 MM = US 9. Work as follows, begin from wrong side: 0-2-3-3-5-5 stitches in garter stitch, knit over knit and purl over purl until 7 stitches remain, 7 band stitches in garter stitch. Continue like this (i.e. cables are done) and work short rows as follows: ROW 1 (= right side): Work the first 16-19-20-21-22-22 stitches, turn and tighten yarn. ROW 2 (= wrong side): Work 16-19-20-21-22-22 stitches. ROW 3 (= right side): Work over all stitches, turn and tighten yarn. ROW 4 (= wrong side): Work over all stitches. Work 1st to 4th row until shawl collar measures approx. 7-8-8-9-9-9 cm = 2¾"-3⅛"-3⅛"-3½"-3½"-3½" on the shortest. Work 1 ridge over all stitches. Bind off. LEFT FRONT PIECE: Cast on 61-67-67-73-79-85 stitches on circular needle size 4 MM = US 6 with 1 strand of each quality. Work 7 band stitches in garter stitch, purl the rest of row. On next row from right side work pattern as follows: 1 edge stitch in garter stitch, work A.1 until 20-18-18-20-18-20 stitches remain, knit 1-0-0-1-0-1, purl 1-0-0-1-0-1, A.10, 7 band stitches in garter stitch. When A.1 has been worked 1 time vertically, work pattern from right side as follows: 1 edge stitch in garter stitch, work A.2 until 18 stitches remain, A.10 as before, 7 band stitches in garter stitch. When A.2 has been worked 1 time vertically, there are 70-77-77-84-91-98 stitches on needle. Switch to circular needle size 5.5 MM = US 9. Work pattern as follows: 1 edge stitch in garter stitch, work A.3 until 20 stitches remain, A.10a, 7 band stitches in garter stitch. Repeat A.3 vertically until piece measures 16-17-19-19-21-22 cm = 6¼"-6¾"-7½"-7½"-8¼"-8¾". Work pattern, begin from right side as follows: 1 edge stitch in garter stitch, work A.4 until 20 stitches remain and decrease at the same time 14-16-16-18-20-22 stitches evenly, A.10a as before, 7 band stitches in garter stitch = 56-61-61-66-71-76 stitches. When A.4 has been worked 1 time vertically, work pattern as follows: 1 edge stitch in garter stitch, work A.5 until 20 stitches remain, A.10a as before, 7 band stitches in garter stitch. Repeat A.5 vertically. When piece measures 30-31-32-33-34-35 cm = 11¾"-12¼"-12½"-13"-13⅜"-13¾", cast on 6 new stitches at the end of next row from wrong side = 62-67-67-72-77-82 stitches. Work the new stitches in garter stitch until finished measurements. Continue pattern like this until piece measures 33-35-36-38-39-41 cm = 13"-13¾"-14¼"-15"-15¼"-16⅛". Work pattern, begin from right side as follows: 7 stitches in garter stitch, work A.6 until 20 stitches remain, A.10a as before, 7 band stitches in garter stitch. When A.6 has been worked 1 time vertically, there are 83-91-91-99-107-115 stitches on needle. Work pattern as follows: 7 stitches in garter stitch, work A.7 until 20 stitches remain, A.10a as before, 7 band stitches in garter stitch. Work A.7 3 times in total vertically. Piece measures approx. 45-47-48-50-51-53 cm = 17¾"-18½"-19"-19¾"-20"-21". Work pattern as follows: 7 stitches in garter stitch, work A.8 until 20 stitches remain and decrease at the same time 21-24-24-27-30-33 stitches evenly, A.10a as before, 7 band stitches in garter stitch = 62-67-67-72-77-82 stitches. When A.8 has been worked 1 time vertically, work A.8a vertically until finished measurements. When piece measures 50-52-54-56-58-60 cm = 19¾"-20½"-21¼"-22"-22¾"-23⅝", bind off the first 7 stitches on next row from right side = 55-60-60-65-70-75 stitches. Then work diagonal shoulder, begin on next row from the neck as follows: * Work pattern as before until 8-9-9-10-11-12 stitches remain, turn and work back *, work from *-* 3 times in total. I.e. work 8-9-9-10-11-12 stitches less on every turn from the neck. On last row towards the neck work until 20-23-24-25-26-26 stitches remain, slip the last 20-23-24-25-26-26 stitches on a thread for shawl collar and cast on 2 new stitches on needle = 37-39-38-42-46-51 stitches. Now work and bind off with an edge over shoulder stitches. Work stitches cast on with shoulder stitches as follows: Work * 1 stitch in stockinette stitch, work next stitch together with first/next stitch from shoulder – remember KNIT TOGETHER, pass the 2 stitches back on the needle they came from with strand on wrong side of piece, make sure not to tighten yarn too much *, work from *-* until all stitches from shoulder have been worked together with the 2 new stitches that were cast on. Bind off the 2 stitches. SHAWL COLLAR: Slip the 20-23-24-25-26-26 stitches from stitch holder on circular needle size 5.5 MM = US 9. Work as follows, begin from right side: 0-2-3-3-5-5 stitches in garter stitch, knit over knit and purl over purl until until 7 stitches remain, 7 band stitches in garter stitch. Continue like this (i.e. cables are done) and work short rows as follows: ROW 1 (= wrong side): Work the first 16-19-20-21-22-22 stitches, turn and tighten yarn. ROW 2 (= right side): Work 16-19-20-21-22-22 stitches. ROW 3 (= wrong side): Work over all stitches, turn and tighten yarn. ROW 4 (= right side): Work over all stitches. Work 1st to 4th row until shawl collar measures approx. 7-8-8-9-9-9 cm = 2¾"-3⅛"-3⅛"-3½"-3½"-3½" on the shortest. Work 1 ridge over all stitches. Bind off. ASSEMBLY: Sew shoulder seams inside 1 stitch on i-cord edge. Sew stitches in garter stitch together. Sew shawl collar tog mid back and sew on to neck line at the back of neck. Sew side seams inside 1 edge stitch. Sew the buttons on to left front piece. |
||||||||||||||||||||||
Diagram explanations |
||||||||||||||||||||||
|
||||||||||||||||||||||
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Comments / Questions (46)
Michelle wrote:
Je viens de terminer ce modèle et il y a un décalage entre le dos et les devants pour faire les coutures d'épaules, en relisant les explications du dos, je pense qu'il y a une erreur, ici : Au rang suivant, vers l’encolure rabattre les 7 premières mailles = 35-37-36-40-44-49 mailles. Je pense que c'est de l'autre côté qu'il faut rabattre pour coller avec les devants... Je vais rectifier sur mon ouvrage, qui est juste magnifique !
24.01.2024 - 20:11Michelle wrote:
Je viens de terminer ce modèle et il y a un décalage entre le dos et les devants pour faire les coutures d'épaules, en relisant les explications du dos, je pense qu'il y a une erreur, ici : Au rang suivant, vers l’encolure rabattre les 7 premières mailles = 35-37-36-40-44-49 mailles. Je pense que c'est de l'autre côté qu'il faut rabattre pour coller avec les devants... Je vais rectifier sur mon ouvrage, qui est juste magnifique !
24.01.2024 - 20:10DROPS Design answered:
Bonjur Michelle, les explications sont justes, les 7 mailles à rabattre pour le dos sont les 7 mailles point mousse de la bordure de l'emmanchure donc au début d'un rang qui se tricote vers l'encolure, vous continuez ensuite en rangs raccourcis pour former le biais de l'épaule, vous faites la même chose pour le devant droit, je cite: rabattre les 7 premières mailles au début du rang suivant sur l’envers = en début de rang sur l'envers, on commence par la bordure d'emmanchure. Bon tricot!
25.01.2024 - 09:09Michelle wrote:
Bonjour, pour l'échantillon il n'est pas indiqué la taille des aiguilles.... 4 ou 5,5 ? Et il y a une erreur dans les conseils sur la taille des aiguilles à la fin du paragraphe.
31.12.2023 - 17:53DROPS Design answered:
Bonjour Michelle, l'échantillon se tricote en jersey avec les aiguilles les plus grosses (5,5 en l'occurence);merci d'avoir relevé l'erreur, elle a été corrigée. Bon tricot!
02.01.2024 - 11:35Valérie wrote:
Comment passez vous de 110 à 128 maille au début du dos entre A1 et A2 MERCI
05.12.2023 - 12:12DROPS Design answered:
Bonjour Valérie, à l'avant-dernier rang de A.2, vous augmentez 1 maille (jeté à la fin des mailles endroit, avant la dernière maille envers du diagramme); vous répétez 18 fois A.2 entre les mailles lisières, vous allez ainsi augmenter 18 mailles au total = 128 mailles. Bon tricot!
05.12.2023 - 16:03Katja wrote:
Hei, flettene i A10 ser ut på bilde at de er strikket vrang fra retten og rett fra vrangen, men i oppskriften er de rett fra retten og vrang fra retten??
07.11.2023 - 07:32DROPS Design answered:
Hej Katja, jo selve snoningen er strikket i glatstrik, det er maskerne på hver side af snoningen du skal strikke vrang fra retsiden :)
10.11.2023 - 15:04Brigitte Vergès wrote:
Bonjour je ne comprend pas le schema qui ne correspond pas a la photo du modèle puisque le gilet s ouvre au milieu et pas sur le côté et il n y a pas de col châle. Merci pour votre réponse
06.10.2023 - 18:33DROPS Design answered:
Bonjour Mme Vergès, les devants sont un peu plus larges que le dos, et, à la fin, on va tricoter un col châle sur les 20-23-24-25-26-26 premières mailles côté encolure pour chaque devant; pour former ainsi la bordure d'encolure qui sera ensuite cousue le long de l'encolure dos. Bon tricot!
09.10.2023 - 08:12Laura Ramirez wrote:
Buenas noches, Perdón, es la primera vez que tejo algo con un patrón de su página y no comprendo bien como se leen los esquemas y se coordinar con la parte escrita. Estoy empezando la espalda pero no entiendo cuándo se usa punto musgo y al decir 1 punto a qué hacen referencia. ¿Hay algun video guia del chaleco en si?
06.10.2023 - 06:46DROPS Design answered:
Hola Laura, todos los videos relevantes para hacer el patrón se encuentran en la sección de videos, después de las instrucciones del patrón y los diagramas. También puedes leer la siguiente lección sobre cómo leer los diagramas a punto: https://www.garnstudio.com/lesson.php?id=68&cid=23. El punto orillo (el 1 punto del borde) se trabaja en punto musgo, es decir, se trabaja siempre de derecho, independientemente de la fila que estés trabajando. Esto se hace para que el borde de la labor quede mejor.
09.10.2023 - 00:58Esperanza wrote:
Mirando el patrón he descubierto cómo va el hombro en diagonal. Es más fácil de lo que parece, pero la forma de expresarse el texto, la traducción es confusa.
20.04.2023 - 02:37Esperanza wrote:
Hola. Espalda; trabajar el hombro en diagonal. no entiendo la explicación
19.04.2023 - 18:42DROPS Design answered:
Hola Esperanza, el hombro diagonal se trabaja de forma similar a las filas acortadas: trabajas el patrón como antes hasta que queden 8 pts (talla XS), girar y trabajar de vuelta. Gira de nuevo y trabajar el patrón como antes hasta que queden 8 pts antes del giro anterior, girar y trabajar de vuelta. Repetir de nuevo, trabajando hasta 8 pts antes del giro anterior. Puedes ver el siguiente vídeo para el método general de filas acortadas: https://www.garnstudio.com/video.php?id=66&lang=es
23.04.2023 - 19:54Liane Plauborg wrote:
Hej Jeg har ikke strikket en sjalskrave med vendepinde før, og jeg er i tvivl om, om den vender rigtigt. Min sjalskrave er kortest mod nakken og længst mod halsen. Er det sådan det skal være? Synes nemlig den er alt for kort i forhold til nakkens længde, når de skal sys sammen. Mvh
29.03.2023 - 17:51DROPS Design answered:
Hej Liane, jo den skal være længst yderst mod halsen og kortest der hvor du syr til halsudskæringen :)
13.04.2023 - 09:48